Filter
Top Products
[ 12 ]
Standby mode
The indicators described are shown
when the phone is ready for use,
with no characters keyed in. In this
state, the phone is in ‘standby
mode’.
A Shows the signal strength of the
cellular system at your current
location. The higher the bar, the
stronger the signal. The symbol
is replaced with the GPRS
symbol when the GPRS
connection has been set to
When available and a
connection is available in the system or in the current cell. See ‘Packet
data (General Packet Radio Service, GPRS)’, p. 39 and ‘GPRS’, p. 44.
B Shows an analog or a digital clock. Also see settings for “Date and
time” on page 45, and “Standby mode” on page 34.
C Indicates which cellular system the phone is currently using.
D Shows the battery charge level. The higher the bar, the more power
left in the battery.
E Navigation bar: shows the currently active profile. If the selected
profile is Normal, the current date is displayed instead of the profile
name. For further information, see “Move the Navigation bar
horizontally” on page 16 and “Profiles” on page 113.
F Shows the current shortcuts assigned for the selection
keys and .
Note: Your phone has a screen saver. If there are no actions for five
minutes, the display is cleared and a screen saver becomes visible.
See “Screen saver timeout - The screen saver is activated when