Filter
Top Products
[ 36 ]
Call waiting: (system service)
The system will notify you of a new incoming call while you have a call in
progress. Select Activate to request the system to activate call waiting,
Cancel to request the system to deactivate call waiting,
or Check status, to check if the function is active or not.
Automatic redial
When this setting is activated, your phone will make a maximum of ten
attempts to connect the call after an unsuccessful call attempt.
Press to stop automatic redialing.
Summary after call
Activate this setting if you want the phone to briefly display the duration
and cost of the last call. To show costs, the Call cost limit needs to be
activated for your SIM card.
1-touch dialing
Select On and the numbers assigned to the 1-touch dailing keys ( -
), can be dialed by pressing and holding the key.
Anykey answer
Select On, and you can answer an incoming call by briefly pressing any
key, except , , and .
Line in use (system service)
This setting is shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which phone line (Line 1 or
Line 2) you want to use for making calls and sending text messages. Calls
on both lines can be answered irrespective of the selected line.
Note: You will not be able to make calls if you select Line 2 and have not
subscribed to this system service.
To prevent line selection, select Line change→Disable if supported by your
SIM card. To change this setting, you need the PIN2 code.