Filter
Top Products
[ 44 ]
• Callback type - The options are Use server no. / Use other no. Ask your
service provider for the correct setting; it will depend on the service
provider’s configuration.
• Callback number - Key in your phone’s data phone number which the
dial back server uses. Usually, this number is the data call phone
number of your phone.
• Use PPP compression - When set to Yes, this option speeds up the data
transfer, if supported by the remote PPP server. If you have problems
with establishing a connection, try setting this to No. Contact your
service provider for guidance.
Glossary: PPP (Point-to-Point Protocol) - a common networking
software protocol that enables any computer with a modem and
a phone line to connect directly to the Internet.
• Use login script - The options are Yes / No.
• Login script - Insert the login script.
• Modem initialization (Modem initialization string)- Controls your
phone using modem AT commands. If required, enter characters
specified by your GSM system service provider or Internet service
provider.
GPRS
Go to Settings→ Connection settings→ GPRS.
The GPRS settings affect all access points using a packet data connection.
GPRS connection- If you select When available and you are in a system that
supports packet data, the phone registers to the GPRS system and sending
text messages will be done via GPRS. Also, starting an active packet data
connection, for example, to send and receive e-mail, is quicker. If you
select When needed, the phone will use a packet data connection only if
you start an application or action that needs it. The GPRS connection is
closed after it is not used by any application.
Note: If there is no GPRS coverage and you have chosen When available,
the phone will periodically try to establish a packet data
connection.