Filter
Top Products
Positioning server
To define an access point, and positioning server for A-
GPS, select Positioning server. The positioning server
may be preset by your service provider, and you may
not be able to edit the settings.
Notation settings
To select which measurement system you want to use
for speeds and distances, select Measurement
system > Metric or Imperial.
To define in which format the coordinate information
is shown in your device, select Coordinate format,
and the desired format.
Phone settings
In phone settings, you can edit settings related to
phone calls and network.
Call settings
Select Menu > Tools > Settings and Phone > Call.
● Send my caller ID — You can set your phone
number to be displayed to (Yes) or hidden from
(No) the person to whom you are calling, or the
value may be set by your service provider when you
make a subscription (Set by network) (network
service).
● Send my internet call ID — You can set your
internet caller ID to be displayed to or hidden from
the person to whom you are calling.
● Call waiting — To be alerted for incoming calls
(network service) while you are in a call, select
Activate. To check whether the function is
activated, select Check status.
● Internet call waiting — To be notified of a new
incoming internet call while you have a call in
progress, select Activated.
● Internet call alert — To be alerted for incoming
internet calls, select On. If you select Off, you are not
alerted, but you receive a notification if you missed
a call.
● Decline call with msg. — To send a text message
to a caller informing why you could not answer the
call, select Yes.
● Message text — Write a text to be sent in a text
message when you reject a call.
● Image in video call — If video is not sent during a
video call, you can select a still image to be displayed
instead.
● Automatic redial — Select On, and your device
makes a maximum of 10 attempts to connect the
call after an unsuccessful call attempt. To stop
automatic redialing, press the end key.
● Show call duration — Activate this setting if you
want the length of a call to be displayed during the
call.
148
Settings