Filter
Top Products
define the order in which the access points are used to
connect to a network.
For example, you can add wireless LAN (WLAN) and
packet data access points to an internet access point
group and use the group for browsing the web. If you
give the WLAN access point the higher priority, the
device connects to the internet through a WLAN if
available and through a packet data connection if not.
To create a new access point group, select Options >
Manage > New destination.
To add access points to an access point group, select
the group and Options > New access point. To copy
an existing access point from another group, select the
group, scroll to an existing access point, and select
Options > Organize > Copy to other dest..
To change the priority order of access points within a
group, scroll to an access point, and select Options >
Organize > Change priority.
Packet data access points
Select Menu > Tools > Settings and Connection >
Destinations > Access point, and follow the
instructions on the display. Or, open one of the access
point groups, select an access point marked with
,
and select Edit.
Use the instructions provided by your service provider
to edit the following:
● Access point name — The access point name is
provided by your service provider.
● User name — The user name may be needed to
make a data connection, and is usually provided by
your service provider.
● Prompt password — If you want to set the device
to ask for a password every time you log into a
server, or if you do not want to save your password
in the device, select Yes.
● Password — A password may be needed to make
a data connection and is usually provided by your
service provider.
● Authentication — Select Secure to always send
your password encrypted or Normal to send your
password encrypted when possible.
● Homepage — Depending on the access point type
you are setting up, enter the web address or the
address of the multimedia message center.
● Use access point — Select After confirmation to
set the device to ask for confirmation before the
connection using this access point is created, or
Automatically to set the device to connect to the
destination using this access point automatically.
Select Options > Advanced settings and from the
following:
● Network type — Select the internet protocol type
to transfer data to and from your device. The other
settings depend on the selected network type.
152
Settings