Filter
Top Products
Beaming information :: 103
Beaming an application
Not all applications can be beamed. A lock icon appears on the Beam screen next
to applications that cannot be beamed.
1. Press Applications Launcher .
2. Press Menu .
3. From the App menu, choose Beam (/B).
4. Choose the Beam From pick list, and then select whether the application you want
to beam is located on your Treo or an expansion card.
5. Choose the application you want to transfer.
6. Choose Beam.
7. When the Beam Status dialog appears, point the IR port on your Treo directly at the
IR port of the receiving device.
8. Wait for the Beam Status dialog to indicate that the transfer is complete before you
continue using your Treo.
For best results, the path
between the two devices
must be clear of obstacles,
and both devices must be
kept stationary. If you have
difficulty beaming, shorten
the distance and avoid
bright sunlight.
If you do not choose a
category upon receiving a
beamed item, the item is
placed in the Unfiled
category.
If you can’t receive beamed
information, try a soft reset
(see page 139).