Filter
Top Products
8 Getting started
1 • Getting started
Read the safety instructions in the “Precautions” section be-
fore use.
To use your phone, you must insert a valid SIM card
supplied by your GSM operator or retailer. The SIM
card contains your subscription, your mobile number,
and a memory in which you can store phone numbers
and messages (see “Phonebooks” page 35).
Insert the SIM card
1.
Press on the battery clip and slide the battery
cover downwards.
Make sure the phone is switched off before removing the
battery.
2.
Remove the battery by pressing the inner clips
one after the other, then pulling the battery from
the left handside.
3.
Remove the SIM card from its holder and place it
on its slot. (be careful that the clipped corner of
the card is in the appropriate corner). Then push
the metal clip holder, until it stops and maintains
the SIM card.
First steps
Philips330_EMEA_Ind3.book Page 8 Jeudi, 31. juillet 2003 3:48 15