Filter
Top Products
Getting started 11
1.
Once the battery and battery cover are clipped on
the phone, plug the charger (supplied with the
phone, in the box) into the right hand socket at
the base of the phone as shown below.
2.
Plug the transformer unit into a main AC power
socket with easy access. The
b
symbol indi-
cates the state of charge:
• During charging the 4 charge indicators change;
Each bar represents around 25% of charge and it
takes around 2.15 hours to fully recharge your
mobile phone.
•
When all 4 bars are steady the battery is fully charged
and you can disconnect the charger
.
• When the battery is charged, remove the connec-
tor by pressing the release button on top of the
connector.
• Depending on the network and condition of use,
talk time goes up to 4 hours and standby time up
to 16 days.
Keeping the charger plugged to the mobile when the
battery is fully charged doesn’t damage the battery. The
only way to turn off the charger is to unplug it, so use
an easily accessible AC power socket. You can connect
the charger to an IT supply (Belgium only).
3.
If you don’t intend to use your phone for several
days, we recommend you to disconnect the bat-
tery.
You can use the phone while it is on charge. If the bat-
tery is completely flat, the battery icon will only reap-
pear after 2 or 3 minutes of charging.
Philips330_EMEA_Ind3.book Page 11 Jeudi, 31. juillet 2003 3:48 15