Filter
Top Products
Getting Connected 94
Beaming with Bluetooth
Setting Bluetooth profiles
You can change the settings for each Bluetooth profile available on your phone.
On the Home screen, press the Start soft key, and select Settings > Connections >
Bluetooth. The following options are available:
• Bluetooth: enables Bluetooth on the device.
• Headset Setting: Change the settings for a profile for connecting to a Bluetooth
headset.
• BPP Setting: Change the settings for a profile for connecting to a Bluetooth printer.
• My Information Setting: Set the display name for your phone and check the
phone’s address.
Searching for and pairing with a Bluetooth device
1. On the Bluetooth screen, press the Menu soft key and select Add new
device...
The phone searches for another Bluetooth device.
2. Select a device to connect to the phone.
3. Enter a Bluetooth password and press the Next soft key. This password is
used just once and you do not need to memorize it.
When the owner of the other device enters the same password, paring is
finished.
Note: Some devices, especially headsets or hands-free car kits, may have a fixed Bluetooth PIN, such as
0000. If the other device has one, you must enter the code.
4. Enter a display name for the other device and press the Next soft key.
5. Check the available services and press the Done soft key.
Using the device options
When you press the Menu soft key from the device list, you can access the following
options:
• Edit: allows you to change the name of the connectable device.
• Delete: allows you to delete the device.
• Turn On Bluetooth/Turn off Bluetooth: allows you to turn Bluetooth on or off.
• Turn On Visibility/Turn Off Visibility: allows other Bluetooth devices to locate
your device, or hides you device.
• COM Ports: allows you to add a COM port.