Filter
Top Products
Settings
242
Phone Lock
Set Phone Lock to prevent others from using your handset. When Phone Lock is
activated, your security code (page 54) is required to use the handset.
Setting Phone Lock
1. In standby mode, press
@
, select Settings and press
J
(Select).
2. Select Security Settings and press
J
(Select).
3. Select Phone Lock and press
J
(Select).
4. Enter your security code (page 54).
5. Select an item and press
J
(Select).
◆
Phone Closed: Phone Lock is activated when you close your handset.
◆
Power Saving: Activate Phone Lock when your handset goes into power saving
mode.
◆
Power On: Activate Phone Lock when the handset is powered on.
6. Select On and press
J
(Select).
The
indicator appears on the standby window when the Phone Lock is activated.
Using Your Handset while Phone Lock is Activated
To use your handset while Phone Lock is activated, enter your security code and press
J
(OK).
Tip
When the phone lock is activated,
you can still perform the following
operations.
Turn the power on and off.
Enter the PIN1 code if the PIN1
Code Request (page 240) is set
to On.
Cancel the phone lock
temporarily.
Make calls to 110 (police), 119
(fi re and ambulance) and 118
(coast guard).
Answer voice calls and video
calls (but the Open to Answer
and Any Key Answer functions
are unavailable).
Place calls on hold (page 56).
Divert calls (page 65).
Reject calls (page 56).
Adjust the ringtone volume while
a call is being received (page 56).
Stop the alarm.
Pause the V-appli (page 180) set
to run in standby mode.
Note
When the phone lock is activated,
the information prompt (page 38)
does not appear.