Filter
Top Products
File Transfer
282
Registering a Bluetooth™ Enabled Device
Before establishing a Bluetooth™ connection, you need to search then register the
Bluetooth™ enabled device. You can register up to 20 detected Bluetooth™ devices.
1. After Step 3 of “Activating Bluetooth™” (page 281), select Paired Devices and
press
J
(Select).
2. Select Search and press
J
(Select).
3. Select a Bluetooth™ enabled device from the detected devices and press
J
(Select).
4. Enter a PIN code (4 to 16 digits) and press
J
(OK).
When the same PIN code is entered in the Bluetooth™ enabled device, that device
is registered.
Setting a Bluetooth™ Compatible Device as a Trusted Device
If you set a registered Bluetooth™ compatible device as a trusted device, a confi rmation
window is not displayed and a connection is established when a connection request is
received from that device.
1. After Step 3 of “Activating Bluetooth™” (page 281), select Paired Devices and
press
J
(Select).
2. Select a Bluetooth™ compatible device and press
J
(Select).
3. Select Trust Device and press
J
(Select).
4. Select On and press
J
(Select).
Note
A PIN code (4 to 16 digits) needs
to be entered within approximately
30 seconds for security reasons.
Tip
To cancel this setting for a device
you no longer want to trust, select
Off in Step 4.