a
• To switch the Annotation Mode to Whiteboard Mode, press
the [Whiteboard] button on the Control Pad or the remote
control, or click
on the toolbar.
• You can also switch computer interactive mode to annotation
mode.
s "Using Computer Interactive Mode" p.111
• When projecting from one computer to two projectors
(multiple displays), you cannot write or draw on multiple
screens.
• When using multiple displays with Windows 7 and using
interactive features on the secondary display, make the
following settings:
- Set the Pen Operation Mode setting to One User/Pen in
the Easy Interactive Function setting in the projector's
Extended menu (EB-1420Wi).
- Set the Pen Operation Mode setting to Mode 2 in the Easy
Interactive Function setting in the projector's Extended menu
(EB-1430Wi).
- Go to Control Panel > Hardware and Sound > Table PC
Settings > Setup to launch the setup program and configure
the interactive features.
If you set up a third display, you cannot use interactive
features with that display.
Annotation Mode Toolbar
The annotation mode toolbar lets you draw and write on the projected
screen. The annotation mode toolbar is shown in the following illustration.
Shows or hides the toolbar. The tab can be moved up and
down.
Switches to Annotation Mode when using Whiteboard
Mode.
Draw on the Projected Image (Annotation Mode)
106