Sub-menu Function
User name
Enter a user name to be used for authentication. You can enter up
to 64 single-byte alphanumeric characters.
If you select PEAP-TLS or EAP-TLS, the user name obtained
automatically from the client certificate is displayed. You can
change the user name if the authentication server requires
another user name.
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.
s
"Changing Settings Using a Web Browser (Web Control)"
p.153
If you also need to enter a domain name, add the domain name
before the user name separated by a backslash.
Password
Enter a password to be used for authentication. You can enter up
to 64 single-byte alphanumeric characters. When the password is
entered and Finish is selected, the value is set and displayed as an
asterisk (*).
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.
s "Changing Settings Using a Web Browser (Web Control)"
p.153
Client Certificate
Displays the Issued to, Issued by, and Validity period
information set in the stored client certificate. It is blank if the
certificate is not set.
Verify Server
Certificate
Set to On to perform verification for the authentication server
certificate. To verify a server certificate, you need to set CA
certificate.
s "Setting Certificates" p.156
CA certificate
Displays the Issued to, Issued by, and Validity period
information set in the stored CA certificate. It is blank if the
certificate is not set.
Sub-menu Function
Setting RADIUS
Server Name
Set to On to perform authentication of the server name during
server certificate verification. By specifying the server name, you
can reduce the risk of connecting to an invalid authentication
server.
RADIUS Server
Name
Specify the authentication server name.
You can enter up to 32 single-byte alphanumeric characters (^
cannot be used).
Verify Exp. date
of Server Cert.
Set to On to perform verification of the certificate's validity
period during server certificate verification.
Wired LAN Menu
Sub-menu Function
DHCP
You can set whether or not (On/Off) to use
DHCP
g
.
If this is set to On, you cannot set any more addresses.
IP Address
You can input the IP address
g
assigned to the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 192.0.2.x, 224.0.0.0 to 255.255.255.255 (where
x is a number from 0 to 255)
List of Functions
194
