Print Menu
Sub-menu Function
Default Printer
Set the default printer used when printing.
The selected printer is displayed as the default in Whiteboard
Mode.
In Annotation Mode, this printer is used automatically.
Quality
Sets the print quality.
Paper Size
Sets the paper size.
Job username
Set the user name to be used for the print job. If nothing is set, the
projector name is displayed.
When editing, you can enter up to 64 single-byte alphanumeric
characters (you cannot use " *+ , / ; < = > ?[ \ ] ` : | and spaces).
IP Address
Enter the IP address for the network printer.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 192.0.2.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Sub-menu Function
Get printer infor‐
mation
Communicates with the printer associated with the IP address,
and automatically recognizes the printer type.
Printer Type
Sets the type of connected printer. Normally use the values set
automatically when printer information is acquired.
Test Print
Prints a test page.
Save Menu
Sub-menu Function
Default Save Lo‐
cation
Sets the default save location for drawing data.
This is displayed as the default save location when saving data in
Whiteboard Mode.
In Annotation Mode, this location is used automatically when
saving data.
List of Functions
185
