Sub-menu Function
ECO Display
When set to On, when the lamp brightness changes from normal
to low or low to normal, leaf icons are displayed at the bottom-
left of the projected screen to indicate the power-saving status.
Reset
You can reset all adjustment values on the ECO menu to their
default settings, except for Standby Mode. See the following to
return all menu items to their default settings.
s "Reset Menu" p.187
Info Menu (Display only)
Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected. Depending on the model used, some input
sources are not supported.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.54
Sub-menu Function
Projector Info
• Lamp Hours: Displays the cumulative lamp operating
time
*
. When it reaches the lamp warning time, the
characters are displayed in yellow.
• Source: Displays the source name for the connected
equipment currently being projected.
• Input Signal: Displays the setting for Input Signal in the
Signal menu according to the source.
• Resolution: Displays the resolution.
• Video Signal: Displays the settings for Video Signal in
the Signal menu.
• Refresh Rate: Displays the
refresh rate
g
.
• Sync Info: Displays the image signal information. It may
be needed if service is required.
• Status: Displays the information about errors that have
occurred in the projector. It may be needed if service is
required.
• Serial Number: Displays the projector's serial number.
• Event ID: Displays the problems occurred in the projector
using the Event IDs, when the projector and the
computer are connected through the network. See the
following page for the detailed information on the Event
ID.
s
"About Event ID" p.227
Version
Main/Main2: Displays the projector's firmware version.
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and
above is displayed as "10H", "11H", and so on.
List of Functions
200
