D
Take out the old Lamp by pulling the handle.
If the Lamp is cracked, replace it with a new lamp, or contact
your local dealer for further advice.
s Epson Projector Contact
List
E
Install the new Lamp.
Insert the new Lamp along the guide rail in the correct direction
so that it fits in place, push in firmly, and once it is fully
inserted tighten the two screws.
F
Replace the Lamp cover.
Attention
•
Make sure you install the Lamp securely. If the Lamp cover is removed,
the power turns off automatically as a safety precaution. If the Lamp or
the Lamp cover is not installed correctly, the power does not turn on.
•
This product includes a lamp component that contains mercury (Hg).
Please consult your local regulations regarding disposal or recycling. Do not
dispose of it with normal waste.
Replacing Consumables
101
