This projector (EB-1925W/1915) is equipped with the following two
functions for automatically correcting the projected image.
• Auto H/V-Keystone
When the projector senses any movement, for example, when it is
moved, repositioned or tilted, it automatically corrects vertical and
horizontal keystone distortions and focus problems. This function of
the projector is called Auto H/V-Keystone.
When the projector remains still for about two seconds after it sensed
a movement, it displays a screen for adjustment and then
automatically corrects the projected image.
s
Quick Start Guide
q
• Auto H/V-Keystone only works when Extended menu -
Projection from the Configuration menu is set to Front.
s p.58
• If you do not want to use the Auto H/V-Keystone function, set
Configuration menu - Settings menu - Keystone - H/V-Keystone
- Auto H/V-Keystone to Off.s p.56
• Screen Fit
Screen Fit is a function that corrects the projected image so that it
aligns with the frame (outer border) of the screen, white board and
the like. By pressing the [Screen Fit] button on the remote control or
the control panel, the projected image is fitted into the screen, and
keystone correction and focus adjustments are performed automatically.
This section explains how to correct the projected image using Screen
Fit.
The following are the conditions for correcting the projected image
using Screen Fit.
Screen size: less than or equal to 100"
Distance between projector and screen: approx. 1.0 to 3.5 m
Correction angle: approx 20˚ right and left/approx. 30˚ up and down
q
• If you exceed the above mentioned range, the projected image
cannot be corrected properly. Correct the projected image
manually. Also, depending on the combination of horizontal and
vertical angles, the range of correction may be narrower than the
above mentioned values.
• Screen Fit does not function if the projector is suspended from a
ceiling. Correct the projected image manually.
Correcting the Projected Image Using Screen Fit (EB-1925W/1915 Only)
23
