Name Function
J
[Menu] button
Displays and closes the Configuration Menu.s p.52
Control Panel (EB-1920W/1910/1830)
Name Function
A
[t] button
Turns the projector power on or off.s Quick Start Guide
B
Status indicators
The color of the indicators and whether they are flashing
or lit indicate the status of the projector. s p.83
C
[Source Search]
button
Changes to the next input source that is connected to
the projector and is sending an image. s p.29
D
[Enter] button
If pressed during projection of computer signal images,
it automatically adjusts the Tracking, Sync., and
Position to project the optimum image.
When a Configuration Menu or a Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
Name Function
E
[w/ ][v/ ]
buttons
Use these buttons to perform keystone correction.
However, these buttons only have the [
][ ]
functions while projecting in Slideshow.
If pressed when a Configuration Menu or a Help screen
is displayed, these buttons select menu items and setting
values.s p.52, p.82
F
[Help] button
Displays and closes the Help screen which shows you
how to deal with problems if they occur.s p.82
G
[Esc] button
Stops the current function.
If pressed when a Configuration menu is displayed, it
moves to the previous menu level.s p.52
H
[a][b] buttons
Adjusts the volume.
However, these buttons only have the [
][ ]
functions while projecting in Slideshow. If pressed when
a Configuration Menu or a Help screen is displayed,
these buttons select menu items and setting values.
s Quick Start Guide , p.52
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of
hearing. Always lower the volume before
powering off, so that you can power on and then
gradually increase the volume.
I
[Menu] button
Displays and closes the Configuration Menu.s p.52
Part Names and Functions
17
