Name Function
O
Focus buttons
(EB-1925W/1915 only)
Press these buttons to adjust the image focus.
s Quick Start Guide
P
USB indicator
The following explains the status of any USB device
connected to USB1 port (EB-1925W/1915 only) or
USB(TypeA) port (EB-1920W/1910/1830 only).
OFF: USB device is not connected
Orange Light ON: USB device is connected
Green Light ON: USB device is operating
Red Light ON: Error
Q
Control panel
s p.16
R
Lamp cover
Open this cover when replacing the projector's Lamp.
s p.99
Rear (EB-1925W/1915)
Name Function
A
Video Input Port
S-Video Input Port
Audio-L/R port
For composite video signals from video sources.
For S-video signals from video sources.
Connects to the audio out port when you want to output
audio from equipment connected to the S-Video Input
Port or the Video Input Port.
s Quick Start Guide
B
Power inlet
Connects to the power cable.s Quick Start Guide
C
Monitor Out port
Audio Out port
Outputs to an external monitor the image signal from
the computer connected to the Computer1 input port.
This is not available for component video signals or
other signals being input to any port other than the
Computer1 input port.
s
p.119
Outputs the sound of the image currently being
projected to external speakers.s p.120
Part Names and Functions
11
