Name Function
L
Computer2 Input Port
Audio2 Port
For video signals from a computer and component
video signals from other video sources.
Connects to the audio out port when you want to output
audio from equipment connected to the Computer2
Input Port.s Quick Start Guide
Also, when inputting audio from an audio source that is
different from the image source, connect it to Audio2 port.
M
RS-232C Port
When controlling the projector from a computer,
connect it to the computer with an RS-232C cable. This
port is for control use and should not normally be used.
s p.122
Rear (EB-1900)
Name Function
A
Video Input Port
S-Video Input Port
For composite video signals from video sources.
For S-video signals from video sources.s Quick Start
Guide
B
Power inlet
Connects to the power cable.s Quick Start Guide
C
Remote Receiver
Receives signals from the remote control.s Quick Start
Guide
D
Security slot
The Security slot is compatible with the Microsaver
Security System manufactured by Kensington.s p.50
E
Air intake vent
Takes in air to cool the projector internally.
If dust collects here it can cause the internal temperature
to rise, and this can lead to problems with operation and
shorten the optical engine's service life. Be sure to clean
the Air intake vent regularly.
F
Lamp Cover Fixing
Screw
Screw to fix the Lamp cover in place.s p.99
Part Names and Functions
14
