Sub Menu Function
Color Adjustment
You can make adjustments by choosing one of the following.
Red, Green, Blue: You can adjust the saturation of each color individually.
(This item cannot be set if Image - Color Mode is set to sRGB or Customized.)
R, G, B, C, M, Y: Adjust the Hue, Saturation, and Brightness for each of R (Red), G (Green), B (Blue), C (Cyan), M (Magenta), and Y (Yellow).
(This item can be set only if Image - Color Mode is set to Customized.)
Auto Iris
(This item can be set only if Image - Color Mode is set to Dynamic, Theatre, or Customized.)
Set whether or not (On/Off) to adjust to the optimum light status for images being projected.s p.32
The setting is stored for each Color Mode.
Reset
You can reset all adjustment values for the Image menu functions to their default settings. To return all menu items to their default settings, see
s p.80
Signal Menu
Items that can be set vary depending on the image signal and Source currently being projected as shown in the following screen shots. Setting details
are saved for each image signal.
You cannot make settings on the Signal menu when the source is USB Display, USB1, USB2, USB, or LAN.
Computer/Computer1/
Computer2
(when RGB signal is input)
Computer/Computer1/
Computer2
(when component video signal is input)
S-Video/Video
HDMI
g
(EB-1925W/1915only)
Sub Menu Function
Auto Setup
You can select whether or not (On/Off) Auto Setup automatically adjusts the image to the optimum state when the Input Signal changes.s p.89
List of Functions
54
