Epson EB-1915 Manual

A SERVICE OF

next previous

Others menu

Sub Menu Function

Trap IP Address 1

Trap IP Address 2

You can register up to two IP addresses for the

SNMP

g

trap notification destination.

You can enter a number from 0 to 255 in each field of the address.

However, the following IP Addresses cannot be used.

127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)

To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a

network administrator.

AMX Device Discovery

When the projector is connected to a network, set this to On to allow the projector to be detected by

AMX Device Discovery

g

. Set this to Off if

you are not connected to an environment controlled with a controller from AMX or AMX Device Discovery.

List of Functions

77