Check Remedy
Is
Contrast
g
adjusted correctly? Adjust the Contrast setting from the Configuration Menu.
s Image Menu - Contrast p.53
Is it time to replace the Lamp? When the Lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer.
When this happens, replace the Lamp with a new lamp.s p.99
Nothing appears on the external monitor (EB-1925W/1920W/1915/1910/1830 only)
Check Remedy
Are images input from a port other than the Computer1 input port? The only images that can be displayed on an external monitor are computer images from the Computer1 input port.
Problems when projection starts
The projector does not turn on
Check Remedy
Did you press the [t] button? Press the [t] button to turn the power on.
Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally.
Disconnect and then reconnect the power cable.s Quick Start Guide
Check that your electrical outlet or power source is functioning correctly.
Do the indicators turn on and off when the power cable is touched? There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable. If
this does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and
contact your local dealer or the nearest address provided in the Support and Service Guide.
s
Epson Projector
Contact List
Is the Control Panel Lock set to Full Lock? Press the [t] button on the Remote Control. If you do not want to use Control Panel Lock, change the setting to
Off. s Settings Menu - Control Panel Lock p.56
Is the correct setting for the remote receiver selected? Check the Remote Receiver from the Configuration Menu. s Settings Menu - Remote Receiver p.56
Problem Solving
91
