Sub Menu Function
Subnet Mask
You can input the
subnet mask
g
for the projector. You can enter a number from 0 to 255 in each field of the address. However, the following
Subnet Masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address
You can input the IP address for the gateway for the projector. You can enter a number from 0 to 255 in each field of the address. However, the
following
gateway addresses
g
cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
MAC Address
Displays the MAC address.
IP Address Display
To prevent the IP address from being displayed on the LAN Standby screen, set this to Off.
Mail menu
When this is set, you receive an e-mail notification if a problem or warning occurs in the projector.s p.121
Sub Menu Function
Mail Notification
You can set whether or not (On/Off) to be notified by e-mail.
SMTP Server
You can input the
IP Address
g
for the SMTP Server for the projector.
You can enter a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Port Number
You can input the Port Number for the SMTP Server. The default value is 25. You can input numbers between 1 to 65535.
Email Address 1/Email
Address 2/Email Address 3
You can input the e-mail address of the destination to send the notification e-mail to. You can register up to three destinations. You can enter up to
32 single-byte alphanumeric characters for the e-mail addresses.
List of Functions
69
