Sub Menu Function
Encryption key 1/
Encryption key 2/
Encryption key 3/
Encryption key 4
You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for
the network in which the projector participates. The type of character and the number that can be entered differ according to the WEP encryption
and Format settings.
If the number of characters you enter is shorter than the required character length, no character is encrypted. If the number of characters you enter
is longer than the required character length, characters that exceed the permitted number are not encrypted.
128Bit - ASCII: Single-byte alphanumeric, 13 characters.
64Bit - ASCII: Single-byte alphanumeric, 5 characters.
128Bit - HEX: 0 to 9 and A to F, 26 characters
64Bit - HEX: 0 to 9 and A to F, 10 characters
Authentication Type
Set the WEP authentication type.
Open: Uses open system authentication.
Shared: Uses shared key authentication.
When WPA-PSK(TKIP/AES) or WPA2-PSK(TKIP/AES) is selected
Sub Menu Function
PSK (Encryption key)
You can enter a Pre-Shared Key (encrypted key) in single-byte alphanumeric characters. Enter at least 8 and up to 32 characters. After entering the
Pre-Shared Key, confirming it with the [Enter] button displays the value in asterisks(*).
List of Functions
67
