Command List
When the power ON command is transmitted to the projector, the
power turns on and it enters warm-up mode. When the projector's
power has turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error
message is output and a ":" is returned.
Item Command
Power ON/OFF On PWR ON
Off PWR OFF
Signal selection
Computer1
(EB-1925W/1920W/
1915/1910/1830 on-
ly)
Computer (EB-1900
only)
Auto SOURCE 1F
RGB SOURCE 11
Component SOURCE 14
Computer2
(EB-1925W/1920W/
1915/1910/1830 on-
ly)
Auto SOURCE 2F
RGB SOURCE 21
Component SOURCE 24
HDMI (EB-1925W/1915only) SOURCE 30
Video SOURCE 41
S-Video SOURCE 42
USB Display SOURCE 51
USB1 (EB-1925W/1915 only) USB
(EB-1920W/1910/1830 only)
SOURCE 52
LAN (EB-1925W/1920W/
1915/1910/1830 only)
SOURCE 53
Item Command
USB2 (EB-1925W/1915 only) SOURCE 54
A/V Mute On/Off On MUTE ON
Off MUTE OFF
A/V Mute selection Black MSEL 00
Blue MSEL 01
Logo MSEL 02
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Cable Layouts
Serial Connection
• Connector shape: D-Sub 9-pin (male)
ESC/VP21 Commands
122
