Epson Research and Development Page 3
Vancouver Design Center
13504BMP Demonstration Program S1D13504
Issue Date: 01/02/01 X19A-B-006-04
13504BMP
13504BMP demonstrates S1D13504 display capabilities by rendering bitmap images on the display.
The 13504BMP display utility is designed to operate in a personal computer (PC) DOS environment
and must be configured to work with your display hardware. Consult documentation for the program
13504CFG.EXE which can be used to configure 13504BMP.
13504BMP is not supported on non-PC platforms.
Installation
Copy the file 13504BMP.EXE to a directory that is in the DOS path on your hard drive.
Usage
At the prompt, type 13504bmp bmp file [/a] [/lcd] [/crt] [/?].
Where: bmp file displays the bmp format file
/a automatically exits after 5 seconds
/lcd displays the image on a LCD
/crt displays the image on a CRT
/? displays the Help screen
Comments
• 13504BMP only currently decodes Windows BMP format images.
• The PC must not have more than 12M bytes of memory when used with the S5U13504B00C
board.
• Follow simultaneous display guidelines for correct simultaneous display operation.
• To determine if the CRT will operate correctly when using a dual panel, refer to the “Maximum
Frame Rates” table in the S1D13504 “Functional Hardware Specification,” document number
X19A-A-002-xx.
• When editing in 13504CFG with CRT enabled and panel disabled, select “Single Panel” from the
“Edit Panel Setup” submenu.
• When a CRT is enabled, the CRT settings will override the panel settings. If a panel is also used,
the CRT timing values will have to be changed to more closely match the panel's timing.
• A CRT cannot show 15 or 16 bits-per-pixel.
• Do not attach a panel with a 16-bit interface to the S1D13504 when a CRT is also attached.
