A SERVICE OF

logo

5. BASE SPECIFICATIONS PARAMETERS
II - 67
(SETUP PARAM 1. 9/16)
# Items Details Setting range (unit)
1265
(PR)
ext01
(bit0)
Command
format 1
Select the command format for the fixed cycle for
compound lathe.
0: Conventional format
1: MELDAS special format
(1 block command method)
0/1
ext01
(bit1)
Command
format 2
Select the command format for the lathe fixed cycle.
0: Conventional format
1: MELDAS special format
0/1
ext01
(bit2)
Command
format 3
Select the command format for the hole drilling
fixed cycle.
0: Conventional format
1: MELDAS special format
0/1
1266
(PR)
ext02 Not used.
1267
(PR)
ext03
(bit0)
G code type Select the high-accuracy control G code.
0: G61.1
1: G08
0/1
1268
(PR)
ext04 Not used.
1269
(PR)
ext05 Not used.
1270
(PR)
ext06
(bit7)
Handle C axis
coordinate
during cylindrical
interpolation
Specify whether the rotary axis coordinate before
the cylindrical interpolation start command is issued
is kept during the cylindrical interpolation or not.
0: Do not keep
1: Keep
0/1