ZENworks® ESM 3.5 Administrator’s Manual 138
Integrity Tests
Each integrity test can run two checks, File Exists and Process Running. Each test will have its
own Success and Fail results.
Figure 95 : Integrity Tests
All defined antivirus/spyware rules have standard tests and checks pre-written. Additional tests
may be added to the integrity rule.
Multiple tests will run in the order entered here. The first test MUST complete successfully before
the next test will run.
To create an integrity test, perform the following steps:
Step 1: Select Integrity Tests on the component tree and click Add New
Step 2: Name the test and provide a description
Step 3: Enter the success report text for the test
Step 4: Define the following for a test failure:
• Continue on Fail - check this if the user may continue to network connectivity
if the test fails, or if the test should repeat
• Firewall Setting - this setting will be applied if the test fails. All Closed, Non-
compliant Integrity or a custom Quarantine firewall setting will prevent the
user from connecting to the network.
