IES-1000 User’s Guide
Static Route 14-1
This chapter explains how to configure static routes for the IES-1000.
14.1 Static Route Overview
The web configurator allows you to set up static routes that tell the IES-1000 how to forward management traffic
when you configure the TCP/IP parameters manually.
14.2 Static Route Setup Screen
Click Static Route Setup in the navigation panel to open this screen.
Static Route Setup is a static route summary table.
Figure 14-1 Static Route Setup
The following table describes this screen.
Table 14-1 Static Route Setup
LABEL DESCRIPTION
Name This field displays the descriptive name for this route. This is for identification purposes only.
Destination
Address
This field displays the IP network address of the final destination.
Subnet Mask This field displays the subnet mask for this destination.
Gateway
Address
This field displays the IP address of the gateway. The gateway is an immediate neighbor of your
IES-1000 that will forward the packet to the destination.
Metric This field displays the cost of transmission for routing purposes.
Add Click this button to configure a new static route.
Delete Select a static route(s)’s Delete check box and click the Delete button to remove the static
route.
Chapter 14
Static
Route
