IES-1000 User’s Guide
Getting Started Screens 10-11
Table 10-9 MAC Count Filter Setup
LABEL DESCRIPTION
Max Static MAC
Count
This field’s first number displays how many MAC addresses are statically specified for a port.
This field’s second number displays the limit of how many MAC addresses may be statically
specified on the port.
10.5.4 MAC Count Filter Edit Screen
Click port number in the MAC Count Filter Setup screen to open this screen.
Figure 10-11 MAC Count Filter Edit
Table 10-10 MAC Count Filter Edit
LABEL DESCRIPTION
Bridge Setup Click this link to go to the Bridge Setup screen.
MAC Count Filter
Setup
Click this link to go to the MAC Count Filter Setup screen.
Filtering Enable Select this check box to enable MAC address count filtering on this port.
Max Dynamic
MAC Count
Use this field to limit the number of MAC addresses that this port may dynamically learn. For
example, if you are configuring port 2 and you set this field to "5", then only five devices with
dynamically learned MAC addresses may access port 2 at any one time. A sixth device would
have to wait until one of the five learned MAC addresses aged out. The MAC address aging out
time can be set in the Bridge MAC Address Record screen (see Figure 10-12).
The valid range is from “0” to “4096”. “0” means this feature is disabled, so the switch will learn
MAC addresses up to the limit of 4096.
