IES-1000 User’s Guide
Commands Introduction 22-17
Table 22-1 Commands
MODULE COMMAND DESCRIPTION
facility <facility>
Sets the syslog facility.
server <ip>
Sets the syslog server IP.
secured host
Shows the secured host.
enable | disable
Enables or disables checking for the
secured host.
add <hostIp>
Adds a secured host.
delete <hostIp>
Deletes a secured host.
date date [<YYYY>-<MM>-<DD>]
[<hh>:<mm>:<ss>]
Sets or show the date and time.
uptime
Shows the system uptime.
version
Shows the system version information.
vlan1q
config save
Saves the VLAN settings to nonvolatile
memory.
list
Shows the run-time VLAN settings.
reset
Reloads the VLAN settings from
nonvolatile memory.
dvlan getentry <vid>
Shows the dynamic VLAN status for
the specified entry.
list
Shows all dynamic VLAN status.
svlan
setentry <vid> <portNo>
Sets a static VLAN entry to normal
tagged.
<ad_control>
Sets a static VLAN entry to
<ad_control> tagged.
<ad_control> <tag_control>
Sets a static VLAN entry to
<ad_control> and tagged or untagged.
setname <vid> <name>
Sets a name of a specific static VLAN.
delentry <vid>
Deletes a static VLAN table entry.
getentry <vid>
Shows the static VLAN setting for the
specified entry.
getname <vid>
Displays the name of a specific static
VLAN.
getnames
Displays the name of all static VLANs.
cpu [<vid>]
Registers the CPU port to the
specified VLAN ID (sets the
management VLAN).
list
Shows all static VLAN settings.
vlan enable/disable
Enables or disables the VLAN.
status
Shows the VLAN’s current status.
