IES-1000 User’s Guide
IEEE 802.1Q Tagged VLAN Commands 31-3
2.
192.168.1.1 vlan1q> vlan enable
31.3 IEEE 802.1Q Tagged VLAN Commands
Bridge port 1 stands for the Ethernet port, bridge port 2 stands for DSL port 1, bridge port 3
stands for DSL port 2, and so on.
31.3.1 VLAN Enable Command
The default for the IEEE 802.1Q Tagged VLAN is disabled. Enable the IEEE 802.1Q Tagged VLAN by following
the example shown next.
Syntax:
192.168.1.1 vlan1q> vlan enable
31.3.2 VLAN Disable Command
You can disable the IEEE 802.1Q Tagged VLAN by using the VLAN Disable command.
Syntax:
192.168.1.1 vlan1q> vlan disable
This command disables the IEEE 802.1Q Tagged VLAN.
31.3.3 PVID Command
Syntax:
192.168.1.1 vlan1q> pvid [<port #> <vlan id>]
where
<port #> =
A bridge port number. Valid parameter range = [1 - 9].
<vlan id> =
The VLAN ID. Valid parameter range = [1 - 4094].
