IES-1000 User’s Guide
Commands Introduction 22-5
Table 22-1 Commands
MODULE COMMAND DESCRIPTION
<n>
Shows buffer <n> in the current buffer
pool.
steal <num>
Steals <num> buffers from the current
buffer pool.
version
Displays version information for the
buffer driver.
bun
version
Displays the bun driver’s version.
build
Shows information on the bun driver’s
build.
config <config_spec>
Enters manual configuration request to
bun driver.
list config
Shows all configuration requests.
devices
Shows all registered bun device
drivers.
ports
Shows all registered bun ports.
Shows all enabled channels on the
specified port.
all opened channels <portName>
Shows open channels on the specified
port.
spices
Shows all available spices.
objects
Shows all data objects.
show system
Shows system attributes.
device <deviceName>
Shows device information for the
specified device.
Shows information for the specified
port.
channel <portName> <channelNo>
Shows information on the specified
channel of the specified port.
set system
Sets system attributes.
port <portName> / <attr> =
<value>
Sets a port attribute.
channel <portName> <channelNo>
/<attr> = <value>
Sets a channel attribute.
Resets port hardware.
list classes
Displays available port classes.
show class <className>
Displays a class’s members.
ethernet filter
Shows the NP filter table.
Selects the PHY address in the SMI
bus.
