IES-1000 User’s Guide
24-12 ADSL Commands
Figure 24-6 Show Profile Command Example
24.3.17 Show Profiles Command
Syntax:
192.168.1.1 adsl> show profiles
The show profiles command displays the settings of all the ADSL profiles.
24.3.18 Set Port Command
Syntax:
192.168.1.1 adsl> set port <port number> <profile name> <oper mode>
where
<port number> =
Port number ranging from 1 to 8.
<profile name> =
The profile that will define the settings of this port.
<oper mode> =
The operational mode. Choose from glite, gdmt, t1413 or auto for
Annex A. Choose from anxb, etsi or auto for Annex B.
The set port command assigns a specific profile to an individual port and sets the port’s mode (or standard).
The profile defines the maximum and minimum upstream/downstream rates, the target upstream/downstream
signal noise margins, and the maximum and minimum upstream/downstream acceptable noise margins of all the
ADSL ports to which you assign the profile.
192.168.1.1 adsl> show profile gold
#Entry type : adslLineConfProfileEntry
ConfProfileName : gold
AtucConfRateChanRatio : 0 %
AtucConfTargetSnrMgn : 6 db
AtucConfMaxSnrMgn : 31 db
AtucConfMinSnrMgn : 0 db
AtucChanConfFastMinTxRate : 32 Kbps
AtucChanConfInterleaveMinTxRate : 32 Kbps
AtucChanConfFastMaxTxRate : 8160 Kbps
AtucChanConfInterleaveMaxTxRate : 8000 Kbps
AtucChanConfMaxInterleaveDelay : 4 ms
AturConfRateChanRatio : 0 %
AturConfTargetSnrMgn : 6 db
AturConfMaxSnrMgn : 31 db
AturConfMinSnrMgn : 0 db
AturChanConfFastMinTxRate : 32 Kbps
AturChanConfInterleaveMinTxRate : 32 Kbps
AturChanConfFastMaxTxRate : 1024 Kbps
AturChanConfInterleaveMaxTxRate : 800 Kbps
AturChanConfMaxInterleaveDelay : 4 ms
ConfProfileRowStatus : active(1)
