IES-1000 User’s Guide
24-4 ADSL Commands
An example is shown next.
Figure 24-1 Linedata Command Example
24.3.7 Lineinfo Command
Syntax:
192.168.1.1 adsl> lineinfo <port number>
where
<port number> = A port number, from 1 to 8.
The lineinfo command shows the line operating values of an ADSL port.
An example is shown next.
Figure 24-2 Lineinfo Command Example
192.168.1.1 adsl> linedata 7
DS carrier load: number of bits per symbol(tone):
tone 0- 31: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
tone 32- 63: 0 0 0 22 22 33 33 33 33 33 33 44 33 44 44 44
tone 64- 95: 4 44 44 43 43 33 34 44 33 44 44 34 44 43 33 44
tone 96-127: 44 43 34 44 44 33 43 44 44 34 44 44 33 44 44 44
tone 128-159: 44 44 44 34 44 34 43 44 33 43 34 33 33 33 33 34
tone 160-191: 43 33 33 34 34 33 23 33 33 33 22 33 33 33 33 33
tone 192-223: 33 33 33 23 22 33 33 33 23 33 33 33 22 23 22 32
tone 224-255: 22 22 22 22 20 22 22 22 20 0 0 0 0 0 0 0
US carrier load: number of bits per symbol(tone)
tone 0- 31: 0 0 0 0 2 34 55 77 88 89 99 99 99 98 88 87
tone 32- 63: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
192.168.1.1 adsl> lineinfo 7
Current Operating Modes:
Data Mode: ATM Service Type in operation: G.DMT
Number of Channels (Down/up stream): 1/1
Downstream Framing Structure : 3
Active down/up stream rate option : 1/1
TRELLIS operation mode is : ON
Current Connection detail:
Down/up stream interleaved Delay : 4/ 4 ms
Downstream Parity byte assigned to fast/interleaved : 0/ 2
Upstream Parity byte assigned to fast/interleaved : 0/ 2
Downstream Symbols assigned to fast/interleaved : 0/ 1
Upstream Symbols assigned to fast/interleaved : 0/ 1
Down/up stream Depth value : 2/ 2
Total Transceiver Output Power : 8dB
Current ATUR Information:
Country code 0
Provider Code 01020304
Capabilities:
g.dmt POTS overlap (Annex A)
