IES-1000 User’s Guide
Getting Started Screens 10-19
Table 10-15 802.1X Setup
LABEL DESCRIPTION
Control When this field displays Auto, the IES-1000 authenticates all subscribers before they can
access the network through this port.
When this field displays Force Authorized, all connected users are allowed to access the
network through this port without authentication.
When this field displays Force Unauthorized, all subscribers are denied access to the network
through this port.
Reauthentication This field displays whether (On) or not (Off) a subscriber has to periodically re-enter his or her
username and password to stay connected to the port.
Reauthentication
Timer
This field displays how often a subscriber has to re-enter his or her username and password to
stay connected to the port.
RADIUS Server Setup Screen
Click 802.1X in the Bridge Setup screen to open the 802.1x Setup screen.
Click RADIUS Server in the 802.1x Setup screen to open this screen.
Figure 10-19 RADIUS Server Setup
Table 10-16 RADIUS Server Setup
LABEL DESCRIPTION
Bridge Setup Click this link to go to the Bridge Setup screen.
802.1X Click this link to go to the 802.1x Setup screen.
IP Address Enter the IP address of the external RADIUS server in dotted decimal notation.
UDP Port The default port of the RADIUS server for authentication is 1812. You need not change this
value unless your network administrator instructs you to do so.
