A SERVICE OF

logo

IES-1000 User’s Guide
20-6 Diagnostics
Table 20-4 DSL Line Diagnostic
LABEL DESCRIPTION
Port This refers to the DSL port number. Select a port upon which you want to perform a loopback
test.
Local Loopback Click this to perform a local loopback test on the specified DSL port. A local loopback test is
used to check the device's DSL chip. A local loopback test failure indicates an internal device
problem.
OAM F5
Loopback
Click this to perform an OAM F5 loopback test on the specified DSL port. An Operation,
Administration and Maintenance Function 5 test is used to test the connection between two DSL
devices. First, the DSL devices establish a virtual circuit. Then the local device sends an ATM
F5 cell to be returned by the remote DSL device (both DSL devices must support ATM F5 in
order to use this test). The results (“Passed” or “Failed”) display in the multi-line text box.
20.3.3 Reset System
Click Diagnostic in the navigation panel and then click the Reset System button and click OK to restart the
system.
Figure 20-3 Reboot System Confirmation
20.4 Logout Screen
Click Logout in the navigation panel to open this screen and exit the web configurator.