Filter
Top Products
6. MENU OPERATION
6-13
Note: If, when “Last updated” is EPFS, input from the navigator is interrupted, the message
“EPFS error” appears. If this occurs, check the navigator.
4. Push the ENTER knob to show the position method window, and then rotate the ENTER
knob to choose the EPFS, MANUAL or NO INFO.
5. Press the ENTER knob. Go to step 6 only when choosing MANUAL at step 4.
6. Push the ENTER knob to open the latitude input window. Use the numeric keys to enter
latitude. If necessary, switch coordinates: 1/RT/CH key to switch to North; 2/DSC key to
switch to South. Push the ENTER knob.
**
Position setup
**
Last up dated: MANUAL
34 41
LON : 135
°
30 EAST
TIME: 09: 00 UTC
LAT : 34
°
41 NORTH
12
34
°
30.1234
N
12
34
°
30.1234 N
NORTH: [1] KEY
SOUTH: [2] KEY
After last digit
is entered
7. Push the ENTER knob to open the longitude input window. Use the numeric keys to
enter longitude. If necessary, switch coordinates: 1/RT/CH key to switch to East; 2/DSC
key to switch to West. Push the ENTER knob.
**
Position setup
**
Last up dated: MANUAL
LAT: 34 41 NORTH
LON : 135˚ 30 EAST
TIME: 09: 00 UTC
LAT : 34
°
30 NORTH
LON : 135
°
30 EAST
12
135
°
30.1234
E
12
135
°
30.1234
E
EAST: [1] KEY
WEST: [2] KEY
After last digit
is entered
8. Push the ENTER knob to open the time input window.
Last up dated: MANUAL
LAT : 34 41 NORTH
LON : 135˚ 30 EAST
TIME : 09: 00 UTC
LAT : 34
°
30.1234 N
LON : 135
°
30.1234 E
TIME: 09: 00 UTC
12 : 34
Position setup
9. Enter UTC time with the numeric keys and then push the ENTER knob.
10. Press the CANCEL key.
Note: When “Last updated” is MANUAL, the message “Warning: Update position” appears
at set intervals (update interval selected with POSITION OLDER on the Alarm menu)
to ask you to update position.