Filter
Top Products
FURUNO
FS-1570/2570/5070
SP - 1 E5656S01A-M
080414
SPECIFICATIONS OF SSB RADIOTELEPHONE
FS-1570/2570/5070
1 MF/HF DIGITAL RADIOTELEPHONE
1.1 GENERAL
1.1.1 Communication system Full-duplex*
1
, semi-duplex or simplex
1.1.2 Class of emission J3E: Telephone
J2B (F1B): DSC and NBDP
H3E: reception only
1.1.3 Frequency range 100.00 kHz to 29,999.99 kHz
1.1.4 Number of channel User programmable: 256 TX/RX pairs
All ITU channels incorporated (include DSC/NBDP channel)
2182 kHz (single action)
1.1.5 Display method Monochrome LCD (180 x 96 dots)
1.1.6 Backlight 8 tones
1.1.7 Contrast 64 steps
1.1.8 Warming up 1 minute approx. (oven 20 minutes approx.)
*
1
: Operating frequency should not be higher than 22 MHz for full-duplex communication,
FS-5070 only
1.2 TRANSMITTER
1.2.1 Frequency range 1,606.5 kHz to 26.175 MHz (100 Hz step)
1.2.2 RF output power FS-1570: 1.6 kHz-4 MHz: 75/100 Wpep (J3E, J2B (F1B))
4.0-26.175 MHz, 150 Wpep (J3E, J2B (F1B))
FS-2570: 1.6-4.00 MHz, 75/100/200 Wpep (J3E, J2B
(F1B))Wpep
FS-5070: 1.6-4.0 MHz, 400 Wpep, 4kHz-26.175 MHz: 500
Wpep*
2
1.2.3 Frequency error Within ±10 Hz
1.2.4 Modulation AF response 350 Hz to 2.7 kHz (SSB)
1.2.5 Modulation system Low power balanced modulation
1.2.6 AF Input -46 dBm/600 ohm (Handset/Microphone)
1.2.7 Line in 0 dBm/600 ohm
*
2
: RF output power should be restricted to 400W on NBDP.
1.3 RECEIVER
1.3.1 Receiving system Double-conversion superheterodyne
1.3.2 Frequency range 100 kHz-29,999.99 kHz (10 Hz step)