Filter
Top Products
9. NBDP FILE OPERATIONS
9-8
4. Enter a new name.
5. Press the Enter key.
9.7 Saving a File Under a New Name
You may save a file under a new name as follows:
1. Open a file.
2. Edit the file as necessary.
3. Press the function key F1.
4. Press the 3 key to save the file.
5. Press the Y key.
6. Press the Backspace key to erase the original name and then enter a new name.
7. Press the Enter key.
9.8 Deleting Files
Insert appropriate floppy disk in the drive and do the following to delete unnecessary files.
1. Press the function key F1.
2. Press the 4 key.
3. Use the ↑ or ↓ key to choose the file to delete and then press the Enter key.
4. Press the Enter key again. (To cancel, press the ↓ key to select NO followed by the
Enter key.)
9.9 Real Time Printing
An incoming or outgoing message can be printed out while it is being received or
transmitted.
1. Press the function key F1 to display the File menu.
2. Press the 6 key to turn real time printing on/off.
When the real time printing is on, “Print” appears in reverse video at the top of the display.
9.10 Printing Files
You can print files stored on floppy disks as follows:
1. Press the function key F1.
2. Press the 7 key.
3. Use the ↑ or ↓ key to choose a file and press the Enter key.
4. Press the Y key.
To stop printing at any time, press F1 and 8 keys.
If the file could not be printed, “Cannot print. Check connection between printer and terminal.
Press any key to escape.” Is displayed.