Filter
Top Products
Get Started
nüvifone M20 Owner’s Manual 3
Charge the Battery
Charge the battery for up to four
hours before using for the rst
time. If you completely discharge
the battery, recharge it for at least
20 minutes before turning on your
nüvifone.
1. Insert the plug into the AC power
adapter, if necessary.
2. Plug the
USB cable into the AC
adapter.
3. Connect the mini-USB end of
the USB cable to the mini-USB
connector on the bottom of your
nüvifone.
4. Plug in the AC adapter into a
power outlet.
You can also charge the nüvifone
using the USB cable and your
computer.
Turn On Your nüvifone
Press and hold the Power key to turn
on and turn off the nüvifone.
Mount the nüvifone in
Your Vehicle
Before mounting the nüvifone, see
page 97 for information about laws
pertaining to windshield mounting.
1. Plug the vehicle power cable into
the power connector on the back
of the cradle.
Cradle
Vehicle
power
cable
2. Remove the clear plastic from the
suction cup. Clean and dry your
windshield and the suction cup
with a lint-free cloth.
3. Place the suction cup on the
windshield.