Filter
Top Products
Page 170 Setting Preferences for Your Communicator
Setting wireless modem configurations
Wireless modem configurations enable you to use your communicator to communicate with your
ISP or dial-in server. In most cases the configuration software on the Handspring CD will set up
the Connection and Preferences settings you need to connect to your ISP or dial-in server. In the
event that you need to manually create a configuration, you must set Network Preferences in
addition to configuring Connection settings to define the communication protocols for the
selected device.
To create a Wireless Modem to Modem connection:
1. From the Connection Preferences screen, select Wireless Modem.
2. Tap Edit.
The name of the current configuration appears at the top of the screen.
3. Tap the Connection Method pick list and select Wireless Modem to Modem.
4. Tap the Dialing pick list and select TouchTone.
Note: Select Rotary only if your telephone service does not support TouchTone dialing.
5. Tap the Volume pick list and select the speaker volume for the modem.
6. Tap Details.