Filter
Top Products
reserved for the voice or video mailbox, and for starting
the web browser.
To call in the standby mode, press the assigned key and
the call key.
Call waiting
You can answer a call while you have another call in
progress if you have activated call waiting in Settings >
Phone > Call > Call waiting (network service).
To answer the waiting call, press the call key. The first call
is put on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select Options >
Transfer. To end the active call, press the end key. To end
both calls, select Options > End all calls.
Voice dialling
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so the user does not record voice tags in
advance. Instead, the device creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
it. The voice recognition in the device adapts to the main
user’s voice to recognise the voice commands better.
The voice tag for a contact is the name or nickname that
is saved on the contact card. To listen to the synthesised
voice tag, open a contact card, and select Options > Play
voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialing in all circumstances.
When you use voice dialling, the loudspeaker is in use.
Hold the device at a short distance away when you say
the voice tag.
1. To start voice dialling, in the standby mode, press and
hold the right selection key. If a compatible headset
with the headset key is attached, press and hold the
headset key to start voice dialling.
2. A short tone is played, and Speak now is displayed.
Say clearly the name or nickname that is saved on the
contact card.
3. The device plays a synthesised voice tag for the
recognised contact in the selected device language,
and displays the name and number. After a time-out
of 2.5 seconds, the device dials the number. If the
recognised contact was not correct, select Next to
view a list of other matches or Quit to cancel voice
dialling.
© 2008 Nokia. All rights reserved. 117