Filter
Top Products
● Flicker cancellation
— To avoid screen flickering,
select 60 Hz.
● Capture tone
— Set the tone that sounds when you
take a picture.
● Memory in use
— Choose where to store your images.
● Restore camera settings
— To return the default
values to the camera settings, select
Yes
.
Setup settings—adjust colour and
lighting
To enable the camera to reproduce colours and lighting
more accurately or to add effects to your pictures or
videos, scroll through the acti
ve toolbar, and select from
the following options:
●
Flash mode
(
) (images mode only) — Select the
desired flash mode.
● Colour tone
(
) — Select a colour effect from the list.
● White balance
(
) — Select the current lighting
condition from the list. This allows the camera to
reproduce colours more accurately.
●
Exposure compensation (
) (images mode
only) — If you are shooting
a dark subject against a
very light background, such as snow, adjust the
exposure to +1 or +2 to
compensate the background
brightness. For light subjects against a dark
background, use -1 or -2.
● Sharpness
(
) (images only) — Adjust the sharpness
of the image.
●
(images only) — Adjust the brightness of the image
● Contrast
( ) (images only) — Adjust the difference
between the lightest and darkest parts of the image.
● Light sensitivity
(
) (images mode only) — Increase
the light sensitivity in low light conditions to decrease
the risk of images that are too dark.
The screen display changes to match any settings you
make so that you see how the change affects the pictures
or videos.
The available settings vary
depending on the selected
camera.
The setup settings are camera-s
pecific; if you change the
settings in the secondary came
ra, the settings in the main
camera do not change. Th
e setup settings are also
shooting-mode specific; if yo
u change the settings in the
image mode, the settings in
the video mode do not
change. Switching between the modes does not reset th
e
defined setu
p settings.
The setup settings return to the default settings when you
close the camera.
If you select a new scene, the colour and lighting settings
are replaced by the selected scene. You can change the
setup settings after selecting a scene if needed.
© 2008 Nokia. All rights reserved.
68
.