● To view information about the video clip, select
Details
● To upload the video clip to a compatible online album,
select
(only available if you have set up an account
for a compatible online album).
See "Share images and
videos online", p. 76.
● To return to the viewfinder to record a new video clip,
press the capture key.
Camera settings
There are two kinds of settings for the camera: setup
settings and main settings. The setup settings return to
the default settings after you close the camera, but the
main settings remain the same until you change them
again. To adjust the setup settings, use the options in the
active toolbar.
See "Setup settings—adjust colour and
lighting", p. 68. To change the main settings, in the
image or video mode, select Options > Settings.
Still image camera settings
To change the main settings, in the image mode, select
Options > Settings and from the following:
● Image quality — Set the resolution Print 3M -
Large (2048x1536), Print 2M - Medium (1600x1200),
Print 1.3M - Small (1280x960), E-mail 0.8M - Med.
(1024x768), or MMS 0.3M - Small (640x480). The
better the image quality, the more memory the image
consumes.
These resolutions are only available in the main
camera. The number of images left for the memory in
use with the chosen resolution is shown on the display.
● Add to album — Save the image to a certain album
in Photos. If you select Yes, a list of available albums
opens.
● Use tag — Add a tag to the current image.
See
"Tags", p. 72.
● Record location — To add GPS location coordinates
to each image file, select Yes. Receiving GPS signal may
take time or the signal may not be available.
See
"Location information", p. 62.
● Show captured image — To see the captured image
after it is taken, select On. To continue taking pictures
immediately, select Off.
● Default image name — Define the default name for
the captured images
● Extended digital zoom (main camera only) — On
(continuous) allows the zoom increments to be
smooth and continuous between digital and extended
digital zoom, On (paused) allows the zoom
increments to pause at the digital and extended digital
step point, and Off allows a limited amount of zoom
while retaining the image resolution.
© 2008 Nokia. All rights reserved. 67