Filter
Top Products
on and search for available WLANs, select the status and
press the scroll key.
To start a search for available WLANs, select the status and
Search for WLAN. To set WLAN scanning off, select the
status and select WLAN scanning off.
To access the WLAN wizard application in the menu, press
, and select Tools > WLAN wiz..
WLAN internet access points
Press , and select Tools > WLAN wiz.
Select Options and from the following:
● Filter WLAN networks — Filter out WLANs in the list
of found networks. The selected networks are filtered
out the next time the application searches for WLANs.
● Details — View the details of a network shown in the
list. If you select an active connection, the connection
details are displayed.
● Define access point — Create an internet access point
(IAP) in a WLAN.
● Edit access point — Edit the details of an existing IAP.
You can also use connection manager to create internet
access points.
See "Active data connections", p. 95.
Operating modes
There are two operating modes in WLAN: infrastructure
and ad hoc.
The infrastructure operating mode allows two kinds of
communication: wireless devices are connected to each
other through a WLAN access point device, or wireless
devices are connected to a wired LAN through a WLAN
access point device.
In the ad hoc operating mode, devices can send and
receive data directly with each other.
Connection manager
Active data connections
Press , and select Tools > Connectivity > Conn.
mgr. > Active data connections.
In the active data connections view, you can see the open
data connections:
data calls
packet data connections
WLAN connections
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
© 2008 Nokia. All rights reserved. 95