Filter
Top Products
©2001 Nokia Mobile Phones. All rights reserved.
216
Extras
The codes are shown as asterisks. If you are changing a code, you will be prompted
for the current code and then the new code twice. The code cannot be changed if
the corresponding security feature is not in use; for example, if the PIN code
request is set to Off, the PIN code cannot be changed.
Tip: This setting cannot
be changed if the phone is
switched off or if there is no
valid SIM card inserted.
PIN code request: If you set the PIN code request On, the communicator requests
that you enter the code every time you turn on the phone. If you enter the
PIN code incorrectly three times in succession, you will need a PUK code
to unblock the SIM card. When the SIM card is blocked, you cannot send
or receive any documents or calls except calls to preprogrammed
emergency numbers. Otherwise, the communicator can be used normally.
You need the lock code to change this setting.
Note: Some SIM cards do not allow you to turn the PIN code request off.
Autolock period: Determines the security time-out period, after which the
communicator will lock. The options are None/2 minutes/5 minutes/10
minutes/ minutes. When the communicator is locked, you can make
emergency calls to predefined numbers using the cover phone. You can
also answer incoming calls and make emergency calls using the
Telephone application. All other actions are blocked. The timer is reset by
any input, data transfer, printing, and so on. You need the lock code to
change this setting.
Lock if SIM card is changed: If set On, every time the phone is switched on this
security option checks whether the SIM card in the communicator has
been changed. If the SIM card has been changed and the new SIM card
has not been used with your communicator previously, the communicator