Filter
Top Products
Changing Your Settings 145
Display Settings
• Style — Sets font (Normal, Quill Pen, Sticky, or Color Dial) used to show
dialed numbers.
•Size — Sets size (Enable Zoom-out or Disable Zoom-out) of the Style font
used to show dialed numbers.
2. Use the Navigation key to highlight the desired option and setting, then
press the key to save the setting.
Banner
Create your own personalized greeting that appears in the display while your phone
is in standby mode.
1. In standby mode, press the MENU key ( ), then press (for
Settings), (for Display Settings), and for Banner. The Banner
text entry screen appears in the display.
Note: If necessary, press and hold the key to erase an existing banner.
2. Enter a word or short phrase (up to 12 characters) to appear in your
phone’s display while in standby mode. (See “Entering Text” on page 47
for more information.)
3. Press the key to save the new banner.
Backlight
You can set the backlight for your display or keypad to remain on or off or to remain
on for a specified period of time.
Note: Prolonged backlight use drains your battery faster.
1. In standby mode, press the MENU key ( ), then press (for
Settings), (for Display Settings), and for Backlight. The
following sub-menus appear in the display:
• Main Display — Sets the amount of time the main display backlight remains
on with the phone idle. Optional settings are 7, 15, and 30 Seconds and Always
On (this setting uses much more power than the timed settings) and Always
Off.
•Keypad — Sets the amount of time the main display backlight remains on with
the phone idle. Optional settings are 7, 15, and 30 Seconds and Always On
(this setting uses much more power than the timed settings) and Always Off.
•Brightness — Use the Left and Right soft keys to select between any of 5
optional settings.
tuv
abc
mno
tuv
abc
pqrs