Plus (+)Code Dialing
When placing international calls, use Plus Code Dialing
to automatically enterthe international access code for
yourlocation (forexample, 011 forinternational calls
made from the United States). This feature is subject to
network availability.
1. Press and hold until a “+”is displayed on your
phone screen.
2. Dial the country code and phone numberyou’re
calling, and press . (The access code for
international dialing will automatically be dialed,
followed by the country code and phone number.)
Dialing From the Contacts List
1. Press Contacts (right softkey).
2. Highlight the entry you want to call and press to
dial the entry’s default phone number.
–or–
To dial anothernumberfrom the entry, select the
name and press , and then select the number
you wish to call and press .
Using Speed Dialing
You can store up to 98 numbers in yourphone’s speed
dial memory to make contacting friends and family as
easy as pressing a key or two. With this feature, you can
dial speed dial entries using one keypress forlocations
2–9 or two keypresses forlocations 10–99. (For
information on setting up speed dial numbers, see
“Assigning Speed Dial Numbers”on page 67.)
ᮣ
From standby mode, press and hold the appropriate
key forapproximately two seconds. The display
confirms that the numberhas been dialed when it
shows “Connecting...”.To use Two-Touch Dialing
(10–99), press the first digit, then press and hold the
second digit.
Note
Speed dialing may not be available when you are
roaming; when you are roaming off the Sprint
National Network, you must always dial using 11
digits (1 + area code + number).
26 Section 2A. Phone Basics